Shaanxi Allstate Tech. & Trade Co., Ltd.
Main products:Stamping parts, Castings, Machining parts, Spray gun, Shock absorber, Bearings, Forgings, Shackles, Air Springs, Electrodeposition machine
Products
Contact Us
  • Contact Person : Mr. Song Chaopeng
  • Company Name : Shaanxi Allstate Tech. & Trade Co., Ltd.
  • Tel : 86-29-88455958
  • Fax : 86-29-88451053
  • Address : Shaanxi,Xi'an,D-1804 Van Metropolis No.35 Tangyan Road, West Hi-Tech Development Zone,
  • Country/Region : China
  • Zip : 710065

Truck Air Bag Suspension

Truck Air Bag Suspension
Product Detailed
Truck Air Bag Suspension 1.high flexibility 2.SGS and ISO9001:2000 certified. 3.Sleeve air springs, Single/Double air spring

 Truck Air Bag Suspension

H series Air spring: BELLOWS : Wall gauge is approximately 5 mm. GIRDLE HOOP: Wire wound type shown, molded into the bellows.BEAD RING: upper and lower. countersunk steel type shown. May also be of a second stamped steel variety or made of aluminum.AIR INLET:  1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.BOLT: M10 x 45 mm Used for mounting the part. MOUNTING PLATE:  The plates must be strong enough and backed by structural members to prevent bowing of the forces or loads involved

 

K series Air spring:BLIND NUT:  M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE:  The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved.AIR INLET:  1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.

ZF series Air springBLIND NUT:  M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE:  The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET:  1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.

CY series Air springBLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.

Your friendly enquiry would be highly appreciated.

Truck Air Bag Suspension



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.